Would your water supplier overdose you with fluoride? Yup!

FLUORIDE 2 min read

From: WQP

In Sandy, Utah, a do not drink advisory was lifted for 600 residents previously cautioned not to drink from their kitchen taps. Why?

Elevated levels of copper and lead.

The contamination occurred when supply employees inadvertently released undiluted fluoride into their water system for about two days.. The town authority is facing backlash because of its late notification of residents of the potential contamination quickly.

According to The Deseret News, an investigation into the town’s water quality began Feb. 6 when residents reported a potential problem. The state was then notified Feb. 8. Approximately 150 residents reported possible symptoms from drinking contaminated water. Several dogs fell ill as well. While Sandy officials announced Feb. 15 that the water was safe to drink again, the do not drink advisory was reissued until lab results were able to determine the amount of lead and copper concentrations.

Test results from two homes revealed lead levels 26 times higher than the federal threshold and copper levels 22 times higher, according to Utah Division of Drinking Water Director Marie Owens.

“Unfortunately, I don’t think we’ll ever be able to know exactly what the homes were exposed to during the 44-hour time frame that the fluoride event was happening,” Owens said. “We can’t go back and retroactively sample that.”

While the do not drink advisory was lifted Feb. 17, many residents still have questions regarding the quality of their water. Residents are questioning whether they need to replace their pipes and copper fittings and have asked the town to test their drinking water.

“What condition are my pipes in right now? What condition is my water heater  in now that I’m not going to be continually exposed?” said Jodi Monaco, resident. “I just want to know. All of us just want to know.”

To their credit, he town is paying for water tests and asks residents to collect water samples. Sandy has been cited by the Utah Division of Drinking Water for failure to adequately notify the public about potential contamination. The agency must be notified of contamination within 24-hours.

“Once I became aware this was more than just a localized event, which was how it was presented to me originally… it was sort of an all-hands-on-deck approach,” said Mayor Kurt Bradburn. “We put everything out on social media. We activated our emergency protocol so we could literally take people door to door and make sure we spoke to them, gave them water, gave them notice. But the point is, we could have done that sooner. And that’s what I deeply apologize on behalf of all residents that we didn’t do that sooner.”

Ian: So.. is this an isolated incident? Unfortunately, no. Here in Australia we were alerted to high fluoride levels on the Gold Coast some years back when the water authority was implementing their new desalination plant.

The Big Question

The question remains: can an off-the shelf water filter cope with this kind of incident. In our view, it`s a no. But there is hope. The UltraStream, (our invention) is an extremely high level performance water filter with a design brief of finding and incorporating the world`s best filtration media. It`s not just talk. We`ve tested its fluoride reduction over the life of the filter and received a reading of 97% removal.

What Do Cervical Traction Systems Do?

Are you having issues with your neck and spinal column? Stress not,for cervical traction has actually been shown to be efficient in treating neck and spinal problems. Cervical traction stretches your head away from your neck for the growth and removal of compressed muscles. Although surgical treatments are likewise an alternative,cervical traction acts as an exceptional,non-invasive alternative.

To complete this procedure,medical experts utilize a cervical traction unit to extend the neck gently. It minimizes the pressure felt on the spine of the patient by pulling the vertebrae. Numerous clients have reported feeling a good deal of convenience following the use of a cervical traction unit.

To learn more,click here, cervical traction reviews by Neck Base

How Do Cervical Traction Units Function?

Cervical traction systems deal with various injuries and manage the signs of chronic health problems. They lower the pressure felt in between the neck and spine by extending the surrounding muscles and joints. This procedure permits you to feel considerable comfort from the discomfort,and it likewise recovers your joints and muscles by fixing oxygen flow and hydration.

Like traction machines utilized by physiotherapists,the cervical traction unit offers a comparable impact,pulling the head from your neck and spine. This treatment guarantees a pressure drop that slows down the progression of an injury in the long run.

Who takes advantage of using cervical traction units?

People who experience persistent pain,high blood pressure,sleeping difficulties,depression,and stress can gain from using a cervical traction system. Because of these typical illness,they can’t perform day-to-day activities like exercising. They likewise feel irritable the majority of the time.

With the help of cervical traction systems,not only will the issue be dealt with,but you will also conserve a great deal of cash since this is a low-cost choice. Because of its mobility that you can decide to stay at home,you don’t have to go to a medical professional or a therapist.

What the Cervical Traction Unit treats

Neck Pain

Pain in the back

Muscle Spasms

Nerve Roots in the spinal column

Degenerative Disk Illness

Injury to the cervical and lumbar regions

Hypertension

Sleeping disorders

Anxiety

Kinds Of Cervical Traction Units

There are 2 kinds of cervical traction systems utilized to treat your neck and back problems. The first kind of traction unit deals with the head and neck. The other type handle extending your spine to alleviate back pains.

1. Neck and Back Cervical Traction Systems

Neck and back cervical traction systems come with neck braces. It supports your neck when being pulled by the cervical traction system.

The neck and back cervical traction units have two types: the air neck traction gadgets and the over the door neck traction.

– Air neck traction looks like a neck brace that relieves your head’s pressure by straightening your neck. Since of the realignment,it rehydrates your neck joints and discs.

– Over the door neck traction uses a harness connected to a rope. It looks like a pulley-block system at first look,and you utilize the rope to set the alignment of your neck.

2. Spine Cervical Traction Units

Spinal Cervical Traction Units repair your lumbar or back issues. It decompresses your spine discs,nerves,and tissues to eliminate neck and back pain. If it starts to form a curve,it also assists with enhancing the posture of your back. Before using a back cervical traction system,be sure to speak with a doctor not to have any problems with your back.

Cervical traction systems help individuals who have problems with their neck,back,and spine. Be sure to consult with your physician to find out if you’re a great candidate to use a cervical traction unit.

They are Quick To Put together

Modular buildings are primarily fabricated offsite and then taken to site where they will be installed. This means a quick set up process as building work and getting the site ready can be done at the same time. Also,horrible weather will not affect the initial set up.

Environmentally Friendly

Modular buildings use less components are they are essentially made to order. In addition,you have a choice of other green choices including rainwater harvesting systems,grass roofs,solar panel roof modules,wind turbines and ground and air sourced heat pumps. Get in touch with us immediately at [dcl= 7824] to find out more.

Flexibility

Modular buildings are different to your typical construction as they are able to be made for both permanent and temporary needs. This means they are able to be added to for ultimate flexibility. They are able to also be taken apart and moved to a different location and perhaps provide different uses.

Cut costs

Materials for modular buildings are able to be bought in bulk. This means that there is an inbuilt lower cost of create as the components themselves are able to be bought at lower cost. Building to an unique design and budget means that there is much less waste as pointed out earlier.

Wintech Modular are able to provide you with all you need to understand,call us immediately or visit our website here outdoor kitchens